[2017-Aug.-Updated]Valid Braindump2go 300-175 VCE and PDF 255Q Offer[122-133]

[Full Version!]2017 August New Updated 300-175 Exam Dumps with PDF and VCE Free Share! Following are some new 300-175 questions:

1.|2017 New 300-175 Exam Dumps (PDF & VCE) 255Q&As Download:
https://www.braindump2go.com/300-175.html

2.|2017 New 300-175 Exam Questions & Answers Download:
https://drive.google.com/drive/folders/0B75b5xYLjSSNZjVxdkhhREFxblU?usp=sharing

QUESTION 122
An admin wants to make sure that for each VLAN added to a vNIC, a static MAC address entry is added to the fabric interconnect. Which setting within Cisco UCS Manager accomplishes this task?

A.    The MAC Register Mode in the network control policy is set to Only Native VLAN.
B.    The MAC Register Mode in the LAN connectivity policy is set to All Host VLANs.
C.    The MAC Register Mode in the network control policy is set to All Host VLANs.
D.    The MAC Register Mode in the LAN connectivity policy is set to Only Native VLAN.
E.    The MAC Register Mode in the link protocol policy is set to All Host VLANs.
F.    The MAC Register Mode in the link protocol policy is set to Only Native VLAN.

Answer: C

QUESTION 123
Which statement about an iSCSI vNIC when it is created with an overlay NIC is true?

A.    It can have any VLAN allowed on it.
B.    It can be assigned a unique MAC address.
C.    It can have a unique pin group assigned to it.
D.    It can have only the overlays native VLAN associated to it.

Answer: D

QUESTION 124
While configuring communication between vCenter and Cisco UCS, which two items are contained in the extension file? (Choose two.)

A.    extension key
B.    plug-in version information
C.    SSL private certificate
D.    Cisco UCS Manager SSL public certificate
E.    SSH public key
F.    Cisco UCS Manager admin credentials
G.    IP address of the hosts utilizing VM link
H.    vCenter SSL public certificate

Answer: AD

QUESTION 125
Cisco UCS Manager has deleted the VM object from its database, yet it still exists in vCenter. For which two reasons is the object removed from the Cisco UCS Manager database? (Choose two.)

A.    The VM last passed traffic more than 5 minutes ago.
B.    The VM is misconfigured.
C.    The VM has been offline for more than 15 minutes.
D.    vCenter is offline.
E.    The VN link policy has been set for auto-deletion during a vMotion event.
F.    The link between the fabric interconnect and IOM is offline.
G.    The object was deleted in the Cisco UCS Manager, which also deletes it from vCenter.
H.    The VM traffic is being sent to a SPAN

Answer: CF

QUESTION 126
Which option describes the difference between “high-performance” and “none” on a VM-FEX port profile?

A.    None is software assisted, and high-performance is software and hardware assisted.
B.    None indicates that VM-FEX is not used on this interface, and high-performance indicates that is used.
C.    None is used for management profiles, and high-performance is used for mission-critical data profiles.
D.    None assumes default scheduling settings for the port profile, and high-performance gives the ports priority in scheduling.

Answer: A

QUESTION 127
While configuring VM-FEX for Hyper-V, the virtual switch does not show up when you add the host with the port-profile management snap-in. Which statement describes the most likely cause?

A.    SR-IOV is not enabled for the virtual switch inside Hyper-V.
B.    Cisco Nexus 1000v is not enabled for the virtual switch.
C.    Hyper-V requires Cisco UCS Manager to utilize Cisco Discovery Protocol on the vNIC profile.
D.    An active VM is not associated with the port profile.
E.    VM-FEX does not work with Hyper-V.
F.    VM-FEX has been configured on the Catalyst switch but not in System Center yet.

Answer: A

QUESTION 128
Which statement about Adapter FEX is true?

A.    Adapter FEX extends the fabric into the server.
B.    Adapter FEX extends the fabric into the hypervisor.
C.    Adapter FEX extends the fabric down to the FEX port.
D.    Adapter FEX extends the fabric down to the VM.

Answer: A

QUESTION 129
Which technology makes VM-FEX possible?

A.    VXLAN
B.    VNTAG
C.    VPC
D.    DVS

Answer: B

QUESTION 130
Where do you configure the VLAN when provisioning new VLANs in VM-FEX?

A.    vCenter on the port group
B.    Cisco UCS Manager on the port profile
C.    Cisco UCS Manager on the service profile
D.    vCenter on the host

Answer: B

QUESTION 131
When using VM-FEX, the new VMs are not connected, but existing VMs are unaffected. Which option describes the most likely cause?

A.    Binding is set to ephemeral on the DVS, but it must be set to static.
B.    Dynamic NICs have been exhausted.
C.    Hostd on the host has stopped responding to Cisco UCS Manager.
D.    The adapter has failed.

Answer: B

QUESTION 132
Which of the following is true concerning Fibre Channel communications on a Cisco Unified Computing System?

A.    Each VSAN requires a dedicated VLAN to carry FCoE traffic.
B.    FCoE VLANs are created like Ethernet VLANs on Cisco Unified Computing System Manager.
C.    FCoE VLANs may overlap with Ethernet VLANs.
D.    Cisco Unified Computing System Manager supports a maximum of 128 active VSANs.

Answer: A

QUESTION 133
Which three tasks can a user with the ext-lan-policy privileges perform? (Choose three.)

A.    Configure management interfaces on the fabric interconnect.
B.    Configure Ethernet pin groups.
C.    Configure management interfaces monitoring policy.
D.    Create/modify/delete vNIC/vHBA placement policies.
E.    Configure DNS providers and DNS domain.
F.    Specify the allowed range for virtual MAC addresses.
G.    Configure fabric interconnect system name.
H.    This privilege has full access to all operations.

Answer: BDF


!!!RECOMMEND!!!

1.|2017 New 300-175 Exam Dumps (PDF & VCE) 255Q&As Download:
https://www.braindump2go.com/300-175.html

2.|2017 New 300-175 Study Guide Video:
https://youtu.be/zm6ho1Bw02E

         

Comments are closed.