[2018-Latest-Version]100% Real Exam Questions-Braindump2go NS0-155 PDF and NS0-155 VCE Dumps 195Q Download[56-66]

2018 January New NetApp NS0-155 Exam Dumps with PDF and VCE Free Updated Today! Following are some new NS0-155 Real Exam Questions:

1.|2018 New NetApp NS0-155 Exam Dumps (PDF & VCE) 195Q&As Download:
https://www.braindump2go.com/ns0-155.html

2.|2018 New NetApp NS0-155 Real Exam Question & Answers Download:
https://drive.google.com/drive/folders/1MxkLZN5KA1zypVTo9BJ6WLvLiN2Rnad8?usp=sharing

QUESTION 56
The snapvault snap create volume snapname command can be executed on the ___________.

A. open systems
B. primary system only
C. secondary system only
D. secondary or primary systems

Answer: D

QUESTION 57
The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from your primary system.

A. True
B. False

Answer: A

QUESTION 58
Which three statements apply to NearStore Personality license? (Choose three.)

A. It increases the storage capacity.
B. It converts the destination storage system to a NearStore system.
C. It requires the nearstore_option license on the destination storage system.
D. It provides increased concurrent streams when the storage systems are used as destinations for
SnapMirror and SnapVault transfers.

Answer: BCD

QUESTION 59
Which Data ONTAP option sets system-wide throttling for all transfers?

A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable

Answer: D

QUESTION 60
The qtree specified for ____ must not exist on the secondary system before you run the ____ command.

A. pri_qtree_path, snapvault start
B. sec_qtree_path, snapvault start
C. pri_qtree_path, snapvault initialize
D. sec_qtree_path, snapvault initialize

Answer: B
Explanation:
snapvault initialize is not a valid command
http://backdrift.org/man/netapp/man1/na_snapvault.1.html snapvault start -r [options] -S [prim_system:]prim_qtree_path [sec_system:] sec_qtree_path
pri_qtree_path is not a valid command
http://hd.kvsconsulting.us/netappdoc/801docs/html/ontap/onlinebk/GUID-DB31E1F4-60A8-4F34- A1C4-8F79754E4DE2.html

QUESTION 61
The snapvault restore command is run on the _________.

A. secondary system to push data to the primary system
B. primary system to pull data from the secondary system
C. secondary system to pull data from the primary system
D. secondary system to push data to the primary storage system

Answer: B
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196979/html/man1/na_snapvault.1.html
The snapvault command has a number of subcommands. The set of subcommands differs on the primary and secondary.
On the primary, the subcommands allow users to configure and manage a set of snapshots for potential replication to the secondary, to abort replication transfers to the secondary, to check status, to restore data from the secondary, and to release resources when a primary qtree will no longer be replicated to a secondary.
On the secondary, the subcommands allow users to configure and manage the replication of primary paths to secondary qtrees, to configure and manage the snapshot schedules which control when all the qtrees in a secondary volume are updated from their respective primary paths and how many snapshots to save, to abort transfers, to check status, and to release resources preserved to restart backups from a restored qtree.

QUESTION 62
To restore a qtree protected with SnapVault from the secondary storage system to the primary
storage system, you can ______________. (Choose two.)

A. restore to a non existing qtree with DOT 7. 2
B. add the new qtree to the primary storage system with DOT 7.2
C. overwrite the existing qtree on the primary storage system with DOT 7.3
D. delete the existing qtree from the secondary storage system with DOT 7.3

Answer: AC
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196991/html/GUID-DB31E1F4-60A8-4F34-A1C4- 8F79754E4DE2.html
You use the snapvault restore command to restore a backed-up qtree saved to the secondary system. Starting with Data ONTAP 7.3, you can restore the data to an existing qtree on the primary system using baseline restore or incremental restore.

QUESTION 63
The snapvault update command is only available on the secondary system.

A. True
B. False

Answer: A
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196979/html/man1/na_snapvault.1.html
snapvault update [ -k n ] [ -s snapname ] [ -w ] sec_ondary_qtree Available on the secondary only. Immediately starts an update of the specified qtree on the secondary.

QUESTION 64
Which tool is available on an OSSV client to assist in starting or stopping the OSSV service, modifying NDMP settings, enabling debugging, and capturing trace files?

A. Operations Manager
B. Protection Manager
C. Svconfigurator GUI
D. svdebug.exe

Answer: C
Explanation:
http://synergy-ds.com/netapp/tr-3466.pdf

QUESTION 65
The OSSV agent on the primary system listens to TCP port 10000 for all SnapVault communications.

A. True
B. False

Answer: A
Explanation:
https://communities.netapp.com/servlet/JiveServlet/previewBody/4791-102-2-13466/tr-3466.pdf
OSSV hosts listen for communications from NDMP manager applications on port 10000 by default.

QUESTION 66
What security mechanism can an administrator use on an OSSV client to set permissions allowing backups to a SnapVault secondary system?

A. Via /etc/hosts.equiv file
B. QSM access list modifiable via svconfigurator
C. Contents inside a file called access and located in OSSV /snapvault/etc
D. MD5 based authentication between SnapVault primary and secondary, with changeable password

Answer: B


!!!RECOMMEND!!!
1.|2018 New NetApp NS0-155 Exam Dumps (PDF & VCE) 195Q&As Download:
https://www.braindump2go.com/ns0-155.html

2.|2018 New NetApp NS0-155 Study Guide Video:
https://youtu.be/G74lQEevDwI

Comments are closed.