yes porn please

[NEW FREE UPDATION] Free Braindump2go Microsoft 70-417 Certification Exam Practice Tests Download (11-20)

New Released Braindump2go Microsoft 70-417 Dumps PDF – Questions and Answers Updated with Microsoft Official Exam Center! Visit Braindump2go and download our 70-417 Exam Questions Now, Pass 70-417 100% at your first time!

Vendor: Microsoft
Exam Code: 70-417
Exam Name: Upgrading Your Skills to MCSA Windows Server 2012 R2 Exam

29

QUESTION 11
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2.
Server1 has the Active Directory Federation Services (AD FS) server role installed.
Adatum.com is a partner organization.
You are helping the administrator of adatum.com set up a federated trust between adatum.com and contoso.com. The administrator of adatum.com asks you to provide a file containing the federation metadata ofcontoso.com.
You need to identify the location of the federation metadata file.
Which node in the AD FS console should you select? To answer, select the appropriate node in the answer area.

wpsD69.tmp_thumb

Answer:

wps2138.tmp_thumb

QUESTION 12
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains an enterprise certification authority (CA).
The domain contains a server named Server1 that runs Windows Server 2012 R2.
You install the Active Directory Federation Services server role on Server1.
You plan to configure Server1 as an Active Directory Federation Services (AD FS) server.
The Federation Service name will be set to adfsl.contoso.com.
You need to identify which type of certificate template you must use to request a certificate for AD FS.
Which certificate template should you identify? To answer, select the appropriate template in the answer area.

wps3BCB.tmp_thumb

Answer:

wps4D2A.tmp_thumb

QUESTION 13
Your network contains an Active Directory domain named contoso.com.
The domain contains four servers.
The servers are configured as shown in the following table.

wps658B.tmp_thumb

You plan to deploy an enterprise certification authority (CA) on a server named Servers.
Server5 will be used to issue certificates to domain-joined computers and workgroup computers.
You need to identify which server you must use as the certificate revocation list (CRL) distribution point for Server5.
Which server should you identify?

A.    Server1
B.    Server3
C.    Server4
D.    Server2

Answer: B
Explanation:
CDP (and AD CS) always uses a Web Server
NB: this CDP must be accessible from outside the AD, but here we don’t have to wonder about that as there’s only one web server.
http://technet.microsoft.com/fr-fr/library/cc782183%28v=ws.10%29.aspx
Selecting a CRL Distribution Point
Because CRLs are valid only for a limited time, PKI clients need to retrieve a new CRL periodically. Windows Server 2003 PKI Applications look in the CRL distribution point extension for a URL that points to a network location from which the CRL object can be retrieved. Because CRLs for enterprise CAs are stored in Active Directory, they can be accessed by means of LDAP. In comparison, because CRLs for stand-alone CAs are stored in a directory on the server, they can be accessed by means of HTTP, FTP, and so on as long as the CA is online. Therefore, you should set the CRL distribution point after the CA has been installed.
The system account writes the CRL to its distribution point, whether the CRL is published manually or is published according to an established schedule. Therefore you must ensure that the system accounts for CAs have permission to write to the CRL distribution point. Because the CRL path is also included in every certificate, you must define the CRL location and its access path before deploying certificates. If an Application performs revocation checking and a valid CRL is not available on the local computer, it rejects the certificate. You can modify the CRL distribution point by using the Certification Authority MMC snap-in. In this way, you can change the location where the CRL is published to meet the needs of users in your
organization.
You must move the CRL distribution point from the CA configuration folder to a Web server to change the location of the CRL, and you must move each new CRL to the new distribution point, or else the chain will break when the previous CRL expires.
Note
On root CAs, you must also modify the CRL distribution point in the CAPolicy.inf file so that the root CA certificate references the correct CDP and AIA paths, if specified. If you are using certificates on the Internet, you must have at least one HTTPs-accessible location for all certificates that are not limited to internal use.
http://technet.microsoft.com/en-us/library/cc771079.aspx
Configuring Certificate Revocation
It is not always possible to contact a CA or other trusted server for information about the validity of a certificate. To effectively support certificate status checking, a client must be able to access revocation data to determine whether the certificate is valid or has been revoked. To support a variety of scenarios, Active Directory Certificate Services (AD CS) supports industry-standard methods of certificate revocation. These include publication of certificate revocation lists (CRLs) and delta CRLs, which can be made available to clients from a variety of locations, including Active Directory Domain Services (AD DS), Web servers, and network file shares.

QUESTION 14
Your network contains three Active Directory forests.
Each forest contains an Active Directory Rights Management Services (AD RMS) root cluster.
All of the users in all of the forests must be able to access protected content from any of the forests.
You need to identify the minimum number of AD RMS trusts required.
How many trusts should you identify?

A.    2
B.    3
C.    4
D.    6

Answer: D
Explanation:
http://technet.microsoft.com/en-us/library/dd772648%28v=ws.10%29.aspx
AD RMS Multi-forest Considerations

wps8D57.tmp_thumb

QUESTION 15
Your network contains an Active Directory domain named contoso.com.
The network contains a file server named Server1 that runs Windows Server 2012 R2.
You create a folder named Folder1.
You share Folder1 as Share1. The NTFS permissions on Folder1 are shown in the Folder1 exhibit. (Click the Exhibit button.)

wpsA01D.tmp_thumb

The Everyone group has the Full control Share permission to Folder1.
You configure a central access policy as shown in the Central Access Policy exhibit. (Click the Exhibit button.)

wpsBBD8.tmp_thumb

Members of the IT group report that they cannot modify the files in Folder1.
You need to ensure that the IT group members can modify the files in Folder1.
The solution must use central access
policies to control the permissions.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    On the Security tab of Folder1, remove the permission entry for the IT group.
B.    On the Classification tab of Folder1, set the classification to "Information Technology".
C.    On the Security tab of Folder1, assign the Modify permission to the Authenticated Users group.
D.    On Share1, assign the Change Share permission to the IT group.
E.    On the Security tab of Folder1, add a conditional expression to the existing permission entry for
the IT group.

Answer: BC
Explanation:
NB added the missing exhibits by searching for a piece of the question on google
=> i did get an answer (a pdf file with a few questions and exhibits, but how to be sure they’re ok…)
initial Answer:
On the Classification tab of Folder1, set the classification to Information Technology. =>true On the Security tab of Folder1, add a conditional expression to the existing permission entry for the IT group. =>false it took me a whole day and a hole night to find that, but now i’m sure of the answer. Let me explain my point of view You first set the Folder1 classification to "Information Technology" so it meets the target resource requirement and the Central Access Policy can be Applied to it, no problem about that.
But my problem is about the second answer, to me none of them is good :
A: On the Security tab of Folder1, remove the permission entry for the IT group. => tested => it failed of course, users don’t even have read permissions anymore
D: On Share1, assign the Change share permission to the IT group =>Everyone already has the full control share permission => won’t solve the problem which is about the NTFS Read permission
E: On the Security tab of Folder1, add a conditional expression to the existing permission entry for the IT group => how could a condition, added to a read permission, possibly transform a read to a modify permission? if they had said "modify the permission and add a conditional expression" => ok (even if that’s stupid, it works) a condition is Applied to the existing permissions to filter existing access to only matching users or groups so if we Apply a condition to a read permission, the result will only be that less users (only them matching the conditions) will get those read permissions, which actually don’t solve the problem neither so only one left :
C: On the Security tab of Folder1, assign the Modify permission to the Authenticated Users group => for sure it works and it’s actually the only one which works, but what about security? well i first did not consider this method => "modify" permission for every single authenticated users? But now it looks very clear :
THE MORE RESTRICTIVE PERMISSION IS ALWAYS THE ONE APPLIED!! So "Modify" for Authenticated Users group and this will be filtered by the DAC who only allows IT group. and it matches the current settings that no other user (except admin, creator owner, etc…) can even read the folder. and this link confirms my theory :
http://autodiscover.wordpress.com/2012/09/12/configuring-dynamic-access-controls-andfile- classificationpart4-winservr-2012-dac-microsoft-mvpbuzz/
Configuring Dynamic Access Controls and File Classification
Note:
In order to allow DAC permissions to go into play, allow everyone NTFS full control permissions and then DAC will overwrite it, if the user doesn’t have NTFS permissions he will be denied access even if DAC grants him access.
And
if this can help, a little summary of configuring DAC:

wpsE6BF.tmp_thumb

QUESTION 16
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
All file servers in the domain run Windows Server 2012 R2.
The computer accounts of the file servers are in an organizational unit (OU) named OU1.
A Group Policy object (GPO) named GP01 is linked to OU1.
You plan to modify the NTFS permissions for many folders on the file servers by using central access policies.
You need to identify any users who will be denied access to resources that they can currently access once the new permissions are implemented.
In which order should you perform the five actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

wpsA.tmp_thumb

Answer:

wps188A.tmp_thumb

QUESTION 17
Drag and Drop Question
You have a server named Server2 that runs Windows Server 2012 R2.
You need to configure the storage so that it appears in Windows Explorer as a drive letter on Server1.
Which three actions should you perform in sequence? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

wps2CF5.tmp_thumb

Answer:

wps45D3.tmp_thumb

QUESTION 18
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a file server named Server1.
All servers run Windows Server 2012 R2.
All domain user accounts have the Division attribute automatically populated as part of the user provisioning process.
The Support for Dynamic Access Control and Kerberos armoring policy is enabled for the domain.
You need to control access to the file shares on Server1 based on the values in the Division attribute and the Division resource property.
Which three actions should you perform in sequence? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

wps6056.tmp_thumb

Answer:

wps730D.tmp_thumb

QUESTION 19
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the Hyper-V server role installed.
Server1 and Server2 are located in different offices.
The offices connect to each other by using a high-latency WAN link.
Server2 hosts a virtual machine named VM1.
You need to ensure that you can start VM1 on Server1 if Server2 fails.
The solution must minimize hardware costs.
What should you do?

A.    On Server2, install the Multipath I/O (MPIO) feature.
Modify the storage location of the VHDs for VM1.
B.    From the Hyper-V Settings of Server1, modify the Replication Configuration settings.
Enable replication for VM1.
C.    On Server1, install the Multipath I/O (MPIO) feature.
Modify the storage location of the VHDs for VM1.
D.    From the Hyper-V Settings of Server2, modify the Replication Configuration settings.
Enable replication for VM1.

Answer: B
Explanation:
You first have to enable replication on the Replica server–Server1–by going to the server and modifying the"Replication Configuration" settings under Hyper-V settings.
You then.go to VM1– which presides on Server2–and run the "Enable Replication" wizard on VM1.

wps8E4B.tmp_thumb

wpsA92B.tmp_thumb

QUESTION 20
You have a server named File1 that runs Windows Server 2012 R2. File1 has the File Server role service installed.
You plan to back up all shared folders by using Microsoft Online Backup.
You download and install the Microsoft Online Backup Service Agent on File1.
You need to ensure that you use Windows Server Backup to back up data to Microsoft Online Backup.
What should you do?

A.    From Computer Management, add the File1 computer account to the Backup Operators group.
B.    From the Services console, modify the Log On settings of the Microsoft Online Backup Service Agent.
C.    From Windows Server Backup, run the Register Server Wizard.
D.    From a command prompt, run wbadmin.exe enable backup.

Answer: C
Explanation:
Download and install the Windows Azure Online Backup Agent After you create an account on the Windows Azure Online Backup website, you can download the Windows Azure Online Backup Agent and install it locally.
An Online Backup node then appears in the navigation pane of the Windows Server Backup console, as shown in Figure 12-

wpsC3FC.tmp_thumb

If you prefer, you can also configure online backups from the Windows Azure Online Backup console, which becomes available after you install the agent. The Windows Azure Online Backup console provides exactly the same set of options as the Online Backup node in the Windows Server Backup console.
Register server The next step is to register your server. Registering a server enables you to perform backups from that same server only. (Remember this point for the exam.) To register the server, from the Actions menu, select Register Server.
The Register Server Wizard includes two configuration steps. First, you are given an opportunity to specify a proxy server if desired. Second, you are asked to provide a passphrase that will be used to encrypt your backup data and a location to save this passphrase in a file.
You need to provide this passphrase when you perform a restore operation, so it’s essential that you don’t lose it. (Microsoft doesn’t maintain a copy of your passphrase.) A Generate Passphrase option creates the passphrase for you automatically. After you register a server, new options for Online Backup appear in the Actions pane, including Schedule Backup, Recover Data, Change Properties, and Unregister Server.


Braindump2go New Published Exam Dumps: Microsoft 70-417 Practice Tests Questions, 371 Latest Questions and Answers from Official Exam Centre Guarantee You a 100% Pass! Free Download Instantly!

25

http://www.braindump2go.com/70-417.html

         

Comments are closed.